VPN for Devices

Walkthrough

Which routers work with IPVanish, DD-WRT and OpenWrt: how to check the model

IPVanish is a VPN service, while DD-WRT and OpenWrt are alternative router firmware. To establish compatibility, check the exact model, the hardware revision and IPVanish's instructions for the chosen firmware; you will need the details from the device's label and access to its settings.

3 min readUpdated Published by VPN for Devices

1. VPN client: check the service's configurations

A VPN client allows a router to connect to a VPN server. Start by checking this mode in the device's documentation.

Below is a conditional verification scheme, not tied to specific equipment. Proton VPN describes OpenVPN support on its service page.

Conditional scenarioProtocolServiceWhat to check
A WireGuard client is listed in the model's documentationWireGuardCitadelVPN MAXConfiguration import
An OpenVPN client is listed in the model's documentationOpenVPNCitadelVPN MAX; Proton VPNConfiguration compatibility

2. IPVanish: choose a verification route

  1. Find the router's exact model and hardware revision.
  2. For the stock firmware, check the manufacturer's documentation on the VPN Client and IPVanish's instructions for this type of connection.
  3. For DD-WRT, find the official entry for your model and a separate IPVanish instruction for that firmware.
  4. For OpenWrt, check the device's support and how to set up IPVanish separately.

The OpenWrt section on VPN explains the technology but does not replace checking the model. DD-WRT or OpenWrt support on its own does not confirm that the router is ready for an IPVanish configuration.

3. A British ISP router: is flashing needed?

First check the built-in VPN client. The ASUS instruction shows this method of configuration, but it cannot be extended to all ASUS devices or any router from a British ISP.

If the documentation does not clarify the device's capabilities, check with the manufacturer or the provider. A failed flashing attempt can leave the router out of action.

If it does not work: check the file and the firmware

If the file is not accepted, match its protocol against the supported client. Request a suitable configuration from the service.

If the instruction does not match the interface, verify the model, revision and firmware version. If no connection is established, check internet access without the VPN and that the connection details are up to date.

Frequently asked questions

Which routers run IPVanish without flashing?

Check this in IPVanish's documentation and the manufacturer's documentation for your model: the presence of a VPN section in the interface still requires verifying the client mode.

Can the OpenWrt section on VPN be treated as a list of compatible routers?

No. Check equipment support separately using the exact model and revision.

Before configuring: a short checklist

  • Verify the model and hardware revision.
  • Confirm the VPN client in the chosen firmware.
  • Find a suitable configuration from the service.
  • Match it against the instruction for the device.

Until these conditions are confirmed, hold off on flashing and buying. You will find other ways to connect devices on the main page.

More on this topic

Sources